Amazon Lab126 Echo Device
PFAS was reported in this product.
Amazon.com Services LLC reported intentionally added PFAS in this product to the Minnesota Pollution Control Agency (MPCA) under Amara’s Law, Minnesota’s PFAS in products reporting law. The details below are taken from that filing.
Filing summary
- Reporting company
- Amazon.com Services LLC
- Category
- Electronics & Appliances
- Reported components
- 12
- Report submitted
- September 14, 2026
- Disclosure ID(s)
- MN-392CPMS
What was reported
| Product component (as reported) | PFAS chemical (as reported) | Function of the PFAS (as reported) | Amount range (as reported) |
|---|---|---|---|
| Connector | Fluoropolymers | Viscosity modifiers | 10,000 ppm to <150,000 ppm (15%) |
| Display module | Perfluoroalkyl substances | Function unknown at this time | 90 to 100% |
| Display module | Polyfluoroalkyl substances | Function unknown at this time | 300,000 to <600,000 ppm (60%) |
| Display module | Polyfluoroalkyl substances | Solvent | 300,000 to <600,000 ppm (60%) |
| Enclosure | Fluoropolymers | Viscosity modifiers | 1,000 ppm to <10,000 ppm (1%) |
| Enclosure | Perfluoroalkyl substances | Function unknown at this time | Practical Detection Limit to <100 ppm |
| Epoxy | Fluoropolymers | Viscosity modifiers | 300,000 to <600,000 ppm (60%) |
| FPC antenna | Fluoropolymers | Insulators | 90 to 100% |
| FPC antenna | Fluoropolymers | Viscosity modifiers | 1,000 ppm to <10,000 ppm (1%) |
| Flex PCA | Fluoropolymers | Insulators | 90 to 100% |
| Flex PCA | Fluoropolymers | Viscosity modifiers | 1,000 ppm to <10,000 ppm (1%) |
| IC | Polyfluoroalkyl substances | Defoamer | 100 ppm to <1,000 ppm (0.1%) |
| LCM display | Polyfluoroalkyl substances | Function unknown at this time | 10,000 ppm to <150,000 ppm (15%) |
| Mic mesh | Fluoropolymers | Viscosity modifiers | 90 to 100% |
| Sheath | Fluoropolymers | Insulators | 90 to 100% |
| SoC | Polyfluoroalkyl substances | Defoamer | Practical Detection Limit to <100 ppm |
| Speaker | Perfluoroalkyl substances | Heat stabilizer | 10,000 ppm to <150,000 ppm (15%) |
The filing
What this data does and doesn’t show
This page lists only what the manufacturer reported to Minnesota. The state’s database covers products with intentionally added PFAS that manufacturers have reported.
A product that does not appear in the database has not been shown to be free of PFAS. It may be covered by a reporting extension, reported with trade-secret redactions, not yet reported, or outside the reporting rules — for example, products manufactured before July 1, 2023 are excluded from reporting. Only products that were reported appear on this site.
This page presents filing information only. It is not a health or safety assessment of any product, and it offers no medical advice.